background image

1.

   

Grip the handlebars with your hands, place one foot on the deck and the other foot on the ground.

2.

   

Pay attention to your surroundings and make sure that your riding area is clear.

3.

   

Kick backwards with your foot beside the scooter to give you motion.

4.

   

Repeat this kicking action in order to stay in motion.

5.

   

To stop or slow down , place your kicking foot on the brake pedal above the rear wheel or put  your kicking foot on the ground.

6.

   

Do not over-steer as this could cause you to fall off the scooter.

Press the red plastic button for disassembly

THREE WHEELED LIGHT UP

EXPLORER SCOOTER - UNICORN

3+

HANDLEBAR STEM ASSEMBLY BY ADULT

TO USE

IMPORTANT SAFETY INFORMATION

WARNING!

MAINTENANCE

·      Protective equipment should be worn. Not to be used in traffic. 50kg max.

·      The scooter should be used with caution, since it requires great skill, so as to avoid falls or collisions causing injury to the user and the third parties.

·      Do not take this scooter on the road or public highway.

·      Please ensure that all locking devices are engaged.

·   Please rotate the bearings and wheels to check if they are rolling smoothly.

·   It is suggested to disassemble, clean, and add lubricant every 6 months paying extra attention to the moving parts, clearing them of grit and dirt so 

     they move freely. Please make sure the parts specifications are correct with the dealers if some parts need to be replaced.

·   Do not leave this product in high temperature, intense sunlight or dusty areas. Store in a dry place.

·   Do not make any modifications to this product. Any modifications made to this scooter will make your consumer rights null and void.

·   Self-locking nuts and other self-locking fixings may lose their effectiveness over time. If any of these components are no longer functioning how they 

     should, it is strongly recommended that you discontinue use of the product and seek replacement parts from the dealer or importer of this product.

·   Wipe with a damp cloth to remove dirt and dust. Do not use industrial cleaners as they may damage the surfaces. Do not use alcohol, alcohol-based or 

     ammonia-based cleaners as they may damage or dissolve some components or soften the decals or the grip surface adhesive.

·      Always wear safety equipment such as helmet, knee pads and elbow pads. Always wear a helmet when riding your scooter and keep the chinstrap 

       securely buckled. Always wear shoes.

·      Ride on smooth, paved surfaces away from motor vehicles.

·      Avoid sharp bumps, drainage grates, and sudden surface changes. Scooter may suddenly stop.

·      Avoid streets and surfaces with water, sand, gravel, dirt, leaves, and other debris. Wet weather impairs traction, braking, and visibility.

·      Do not ride at night.

·      Brake will get hot from continuous use. Do not touch after braking.

·      Avoid excessive speed associated with downhill rides.

·      Adults must assist children in the initial adjustment procedures to unfold scooter, adjust handlebar and steering to height, and finally to fold scooter.

·      Obey all local traffic and scooter riding laws and regulations. Watch out for pedestrians.

·      Check and make sure all fasteners and wheels are tightly in place before using the scooter (hex keys are supplied to tighten these if necessary).

·      Replace worn or broken parts immediately.

·      Do not use this product for jumping stunts or tricks.

·      Never ride the scooter without tightening the folding mechanism.

·      Always ensure all screws and nuts are securely tightened before every use.

SO THAT YOUR WARRANTY IS 

VALID PLEASE REGISTER AT 

WWW.ZINCSPORTS.COM 

WITHIN 30 DAYS OF

RECEIVING THE PRODUCT.

WARRANTY

Need Help? 

Visit our website for replacement parts and product support WWW.ZINCSPORTS.COM

Contact us at [email protected] OR CALL OUR CUSTOMER SERVICE LINE ON +44(0) 800 731 0006

Reviews: