![background image](http://html1.mh-extra.com/html/valco-melton/d4/d4_manual_849618220.webp)
1
Valco Melton
D SERIES HOSE/GUN CABLE
ASSEMBLY INSTRUCTIONS
IS0227
DATE [7/28/11]
DATE [7/28/11]
DATE [7/28/11]
DATE [7/28/11]
DATE [7/28/11]
Important
Information
WARNING!
WARNING!
WARNING!
WARNING!
WARNING!
Read and follow all instructions, warnings, tag, and label
before operating the equipment. Only qualified
personnel should perform this procedure. USE OF THIS
EQUIPMENT IN A MANNER OTHER THAN
DESCRIBED IN THIS INSTRUCTION SHEET AND
FAILING TO FOLLOW ALL INSTRUCTIONS COULD
RESULT IN PERSONAL INJURY, DEATH, OR
DAMAGE TO EQUIPMENT.
All equipment is to be installed and all connections are
to be made only by qualified personnel. Components
and accessories are to be installed in accordance with
the instructions provided and applicable codes for the
region installed. FAILURE TO FOLLOW THESE
INSTRUCTIONS COULD RESULT IN A PERSONAL
INJURY, DEATH, OR DAMAGE TO EQUIPMENT.
WARNING!
WARNING!
WARNING!
WARNING!
WARNING!
The equipment may still be energized even after the
circuit breaker or main power switch is off.
·
All equipment must be properly grounded and
fused in accordance with rate current consumption
(refer to the equipment identification plate)
·
Gauge and insulation for power supply must be
adequate to handle rated current consumption.
·
Protective clothing and gear should be worn at all
times when performing hot-melt tasks.
Summary of Contents for D4
