![background image](http://html1.mh-extra.com/html/valco-melton/d4/d4_manual_849618087.webp)
MM147 - D4 Hot Melt Unit
Section 5 - Setup
87
Selecting the RTD type
1. Use the + or – buttons to select the type of RTDs used in the system. The RTD type can be Ni120 or
PT100.
All D10/D16 hot melt units use Ni120 RTDs. PT100 should not be
selected, this will cause the system to malfunction.
2. After selecting the RTD type, press the right arrow button to continue.
Selecting the Number of Pumps
1. Use the + or – buttons to select the number of pumps on the hot melt unit.
All D10/D16 hot melt units use 1 pump. More than 1 pump should
not be selected, this will cause the system to malfunction.
2. After selecting the number of pumps, press the right arrow button to continue.
Selecting the Number of Hose Outlets
1. Use the + or – buttons to select the number of hose outlets equipped. The number of hose outlets can be
determined by examining the part number stamped on the data plate of the unit, and then referencing the
chart below.
2 Hose Outlets
4 Hose Outlets
D4 F2…
D4 F4…
D4 V2…
D4 V4…
The number of hose outlets should match the number of hose
connectors mounted in the back panel of the unit. D series units
have 2 or 4 hose connectors.
2. After selecting the number of hose outlets, press the right arrow button to continue.
Summary of Contents for D4
