![background image](http://html1.mh-extra.com/html/valco-melton/d4/d4_manual_849618209.webp)
IS0344
Anybus Installation and Setup
ValcoMelton 1
IS0344 - Anybus Installation and Setup
2/18
Description
The Melter Communication Interface PCB is a communication interface between the Hot Melt Unit and a parent-
machines PLC. This interface allows the user to set and monitor parameters and data from the Hot Melt Unit. For a
list of accessible parameters, see the
Data Index
and
Control Byte
sections in
Section 3 - Configuring the Melt Unit
.
There are two operation modes when interfacing with the Melter:
1.
Remote mode:
The PLC acts as the master in a master-slave system. The user can read and write all
parameters that are available through the interface. In this mode, many parameters cannot be changed
from the Hot Melt Unit display because they are set from the Melter Communication Interface.
2.
Local mode:
The PLC is serves only as an observer of the Melter, and can only read, but not change,
system parameters. The Melter becomes an information resource for the connected system.
Physical Installation
The Melter Communication Interface PCB is mounted to the back of the Melt Unit CPU board, and is connected to J4
and J2 on the CPU board. A ribbon cable and standoffs are included in the mounting kit.
Remove Nuts
*
Summary of Contents for D4
