![background image](http://html1.mh-extra.com/html/valco-melton/d4/d4_manual_849618194.webp)
2
Valco Melton
IS0213
Pressure Switch Installation Instructions
1.
Disconnect the power to the unit.
2.
Coat the adapter fitting (792XX340) threads with anti-seize
compound.
WARNING!
WARNING!
WARNING!
WARNING!
WARNING!
Be sure the unit is off and power is disconnected and
locked out before starting the replacement/installation
procedure. FAILURE TO TURN OFF AND
DISCONNECT/LOCK OUT ALL POWER CAN RESULT
IN PERSONAL INJURY OR DEATH.
Installation
To install into a hose port or gauge port proceed to the next step.
To install into a hose port or gauge port proceed to the next step.
To install into a hose port or gauge port proceed to the next step.
To install into a hose port or gauge port proceed to the next step.
To install into a hose port or gauge port proceed to the next step.
If the pressure switch is to be installed into the side of the manifold
If the pressure switch is to be installed into the side of the manifold
If the pressure switch is to be installed into the side of the manifold
If the pressure switch is to be installed into the side of the manifold
If the pressure switch is to be installed into the side of the manifold
proceed to “Installing the Pressure Switch into the Side of a
proceed to “Installing the Pressure Switch into the Side of a
proceed to “Installing the Pressure Switch into the Side of a
proceed to “Installing the Pressure Switch into the Side of a
proceed to “Installing the Pressure Switch into the Side of a
Manifold,” step 1.
Manifold,” step 1.
Manifold,” step 1.
Manifold,” step 1.
Manifold,” step 1.
3.
Remove the hex plug from the desired hose ports.
4.
Attach the adapter fitting to the open port on the back of the
manifold.
5.
Connect the desired pressure switch to the adapter fitting.
Installing the
Pressure Switch into
the Side of a Manifold
1.
Remove the hex plug from side of the manifold as shown below.
2.
Attach the adapter fitting to the open port on the side of the
manifold.
3.
Connect the desired pressure switch to the adapter fitting.
Summary of Contents for D4
