![background image](http://html1.mh-extra.com/html/valco-melton/d4/d4_manual_849618181.webp)
1
Valco Melton
EXTERNAL POT FILL INSTRUCTIONS
IS0234
1 / 1 3
1 / 1 3
1 / 1 3
1 / 1 3
1 / 1 3
Important
Information
WARNING!
WARNING!
WARNING!
WARNING!
WARNING!
Read and follow all instructions, warnings, tags, and
labels before operating the equipment. Only qualified
personnel should perform this procedure. USE OF THIS
EQUIPMENT IN A MANNER OTHER THAN
DESCRIBED IN THIS INSTRUCTION SHEET, AND
FAILING TO FOLLOW ALL INSTRUCTIONS, COULD
RESULT IN PERSONAL INJURY, DEATH, OR
EQUIPMENT DAMAGE.
WARNING!
WARNING!
WARNING!
WARNING!
WARNING!
All equipment is to be installed, and all connections
made, only by qualified personnel. Components and
accessories are to be installed in accordance with the
instructions provided, and applicable codes for the
region installed. FAILURE TO FOLLOW THESE
INSTRUCTIONS COULD RESULT IN A PERSONAL
INJURY, DEATH, OR EQUIPMENT DAMAGE.
WARNING!
WARNING!
WARNING!
WARNING!
WARNING!
The equipment may still be energized, even after the
circuit breaker or main power switch is off.
·
All equipment must be properly grounded and fused in
accordance with rate current consumption (refer to the equipment
identification plate)
·
Gauge and insulation for the power supply must be adequate to
handle rated current consumption.
Description
This instruction sheet will cover how to install an external pot fill system. This
system can be installed with any parent machine that has the universal
temperature control.
Installation
1.
Open the front operator panel on the parent machine.
To install the cord grip in a D-series parent machine, proceed to
To install the cord grip in a D-series parent machine, proceed to
To install the cord grip in a D-series parent machine, proceed to
To install the cord grip in a D-series parent machine, proceed to
To install the cord grip in a D-series parent machine, proceed to
the next step. If the parent machine is not a D-series, proceed to
the next step. If the parent machine is not a D-series, proceed to
the next step. If the parent machine is not a D-series, proceed to
the next step. If the parent machine is not a D-series, proceed to
the next step. If the parent machine is not a D-series, proceed to
step 5:
step 5:
step 5:
step 5:
step 5:
2.
Remove one of the knockouts from the front of the chassis.
3.
File down any remaining metal chips from the knockout hole.
4.
Attach the provided cord grip to the new mounting hole.
Summary of Contents for D4
