manualshive.com logo in svg

VALCO MELTON D4, Manual

Share
Download
VALCO MELTON D4 Manual Download Page 143

MM147 - D4 Hot Melt Unit 

                                                                           Section 12 - Service 

 

143 

Section 12 - Service 

If a problem with your system persists, contact a ValcoMelton Technical Support representative. If your need is 
urgent, we encourage you to contact our corporate office in Cincinnati, Ohio, U.S.A. at (513) 874-6550. If the problem 
cannot be resolved, Valco Cincinnati, Inc.  will promptly arrange to have a technical representative visit your facility. 
Any charges for a service call will be quoted at that time. Any part that fails during the warranty period shall be 
returned prepaid to Valco Cincinnati, Inc. by the customer for disposition. 

Upon request, ValcoMelton personnel are available to repair or 
replace such parts at the customer’s facility. Charges for this service 
include travel time and expenses. 

If an equipment problem is the result of customer abuse, improper installation or operation, all travel time, labor, parts, 
and expenses will be charged to the customer. 

If the responsibility for a problem cannot be absolutely determined, the customer will be charged for travel time and 
expenses only. No charge will be made for parts and labor.   

 

Summary of Contents for D4






























































































































































































































































Reviews:

No comments

Brands by name

Popular brands

Load more brands