![background image](http://html1.mh-extra.com/html/valco-melton/d4/d4_manual_849618108.webp)
Section 8 - Troubleshooting and Repair
MM147 - D4 Hot Melt Unit
108
Problem
Possible Cause
Possible Solution
5. 5. Uneven
flow of
adhesive to
applicators
6. 5a. Material viscosity too high
7. 5a.
8. -Reservoir temperature too low
9. -Raise reservoir temperature in
accordance with adhesive
manufacturer’s specifications.
10. -Wrong adhesive
11. -Seek adhesive manufacturer's
recommendations.
12. 5b. Adhesive overheated
13. 5b. Reduce reservoir temperature
in accordance with adhesive
manufacturer’s specifications.
14. 5c. Glue hoses not at the same
temperature
15. 5c. Reset temperature controllers.
16. 5d. Different pressure drop through
each hose
17. 5d.
18. -Hoses not the same length
19. -Use same length hoses.
20. -Crimped hose(s)
21. -Replace hose(s)
22. -Leaking hose(s)
23. -Replace hose(s)
24. 5e. Adhesive supply low
25. 5e. If sides of tank are charred,
drain, clean, flush, and refill
system.
26. 5f. Manifold partially clogged
27. 5f. Drain, clean, flush and refill.
28. 5g. Nozzles partially clogged
29. 5g. Inspect system for charred
adhesive and foreign matter.
Drain, clean, flush and refill
system.
Summary of Contents for D4
