![background image](http://html1.mh-extra.com/html/valco-melton/d4/d4_manual_849618214.webp)
IS0344
Anybus Installation and Setup
6 ValcoMelton
Send Packet (PLC) Frame
Bit Definitions for Control Byte 0
These are control bits executed with each message by the Melter. When in remote mode, these functions are
controlled only by the PLC, and cannot be updated at the Melter. In local mode, this byte is ignored, and full control is
at the Melter.
For each of the control bits,
ON
has a value of 1 and
OFF
has a value of 0.
Bit 0:
Control Power ON/OFF
Bit 1:
Master Pump Enable ON/OFF
Bit 2:
Pump 1 ON/OFF
Bit 3:
Pump 2 ON/OFF
Bit 4:
Pump 3 ON/OFF
Bit 5:
Pump 4 ON/OFF
Bit 6:
Temperature Setback ON/OFF
Bit 7:
Auto Pump Enable ON/OFF
Command Byte 1
This command byte tells the Melter what to do with the Data Index and Channel bytes. The following command codes
(in hex) are defined:
Command
Description
0x01
Control Byte Only
0x03 Read
0x06 Write
If the Melter is put into local mode, the Write Command will return a
local mode fault
. All other commands not listed will return a
wrong
command fault
.
Byte0 Byte1 Byte2 Byte3 Byte4, 5
Control
Data Index
Pump1 speed%
Command
Byte6, 7 Byte8, 9
Channel
Data Value
Byte10, 11 Byte12, 13 Byte14, 15
Pump2 speed%
Pump3 speed%
Pump4 speed%
Not Used
Summary of Contents for D4
