IS0344
Anybus Installation and Setup
10 ValcoMelton
Error Codes
On an Error, the Status (byte 0, 1) will send back a 0x4000 hex, indicating an error has occurred. When this occurs,
the Data Index (byte 2) will be set to the corresponding error code:
Error Code
Description
0x00 No
Fault
0x01
Wrong Command Received
0x02
Wrong Data Index Received
0x03
Wrong Channel Received
0x04
Object is Read only
0x05 No
Channel
0x06 Outside
Range
0x07 Local
Mode
Examples
1) Enable Melter and set the zone 1 temperature setpoint
Control = 0x01 (Heater enable only)
Command = Write 0x06
Data Index = 115 (0x73) Setpoint
Channel = 0
Data =70 degrees (0x46)
PLC
Æ
CPU: 0x01,0x06,0x73,0x00,0x46,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00
CPU
Æ
PLC:
0x00,0x01,0x73,0x00,0x46,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00
2) Read current zone 1 temperature
Control = 0x01 (Heater enable only)
Command = Read 0x03
Data Index = 120 (0x78)
Channel = 0
PLC
Æ
CPU: 0x01,0x03,0x78,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00
CPU
Æ
PLC:
0x00,0x01,0x78,0x00,0x00,0x46,0x00,0x46,0x00,0x46,0x00,0x46,0x00,0x46,0x00,0x46
This example also assumes zones 1-5 are available, and that all are
at 70 degrees
Summary of Contents for D4
