![background image](http://html2.mh-extra.com/html/united-technologies/interlogix-truvision-dvr-44hd/interlogix-truvision-dvr-44hd_user-manual_4034815094.webp)
92
TruVision DVR 44HD User Manual
Chapter 13
Alarm and event setup
This chapter describes the alarm and event setup menu and provides more information on the
different types of alarms and connected responses.
Set up alarm inputs
The recorder can be configured to record when an alarm is triggered by an external alarm
device (for example, PIR detector, dry contacts…) “A” inputs are marked A for
Analog
and are
physical inputs on the recorder. “D” inputs are marked as D for
Digital
and are physical inputs
on the IP cameras.
To set up external alarms:
1. From the menu toolbar, click
Alarm & Event Setup
>
Alarm Input
.
2. Select the alarm input number of a camera, which corresponds to the connector on the back
panel of the recorder, and enter the name of the input, if required.
3. Select the alarm input type, NO (normally open) or NC (normally closed). Default is NO.
4. Check the
Enable Alarm Input
box and click
Actions
to set up the rules for the cameras to
be triggered, their alarm schedules, method of alarm notification and PTZ linking function.
5. Select the cameras to be triggered when an external alarm is detected.
Check the
Actions
button. In the Actions window that appears, click the
Trigger Channel
tab and then select the cameras to be triggered for recording when an alarm is detected.
Only analog cameras can be selected. Click
Apply
to save the settings.
Summary of Contents for interlogix TruVision DVR 44HD
Page 1: ...TruVision DVR 44HD User Manual P N 1072968 EN REV B ISS 11AUG15...
Page 174: ......