Chapter 2: Physical installation
TruVision DVR 44HD User Manual
11
Description
Use
Specification
13.
16 alarm inputs
Connect physical alarms such as
detectors, push buttons, etc.
14.
Four alarm outputs
Connect physical alarm outputs such as
a siren, flash, relay.
15.
Ground
Connect to ground.
16.
Power cord
Connect a PSU.
The PSU is shipped with the recorder.
17.
Power switch
Turn the recorder on/off.
Monitor connections
Connect a monitor to one of the recorder’s outputs (BNC/VGA/HDMI). The recorder provides a
1 Vp-p analog signal. See Figure 1 on page 10 for connecting a monitor to a recorder.
The recorder supports up to 1280 × 1024 / 60 Hz resolution in VGA/HDMI. The monitor
resolution should be at least 800 × 600. Adjust your monitor accordingly to this resolution.
Rack mounting
The recorder is 1.5U and is rack mountable using the rack mount ears delivered with the
product. See Figure 2 below.
Figure 2: Rack-mount installation
To install the racks:
1. Attach the two small front-rack mount ears (A) to the recorder (supplied).
2. Attach the recorder to the front rails (B) (screws not supplied).
Summary of Contents for interlogix TruVision DVR 44HD
Page 1: ...TruVision DVR 44HD User Manual P N 1072968 EN REV B ISS 11AUG15...
Page 174: ......
