Chapter 15: Storage management
TruVision DVR 44HD User Manual
107
4. Click
Apply
to save the settings and then
OK
return to the previous window.
5. In the menu toolbar, click the
Camera Setup
>
Camera Recording
.
6. Select the camera to be used for redundancy.
7. Check
Redundant Record/Capture
.
8. Click
Apply
to save the settings.
9. Repeat steps 6 to 8 for other cameras whose files you would like to be redundantly
recorded.
10. Click
Exit
to return to live view.
Managing eSATA
If you are using an external eSATA device connected to the recorder, you can configure the
eSATA to record/capture or export video.
Select the Export option when using the eSATA as a backup. See “Quick Archive” on page 49
for further information.
Select the Record/Capture option to record and capture video. Information on the eSATA for
this purpose can be seen under System settings > Hard Disk > HDD Information.
To set up the e-SATA device:
1. From the menu toolbar, click
Storage Management
>
HDD Information.
2. Under
eSATA
, select the desired eSATA.
3. Under
eSATA
, select the
Record/Capture or Archive
.
4. Click
Apply
to save the settings.
Storage mode
To ensure an efficient use of the storage space available on HDDs, you can control an
individual camera’s storage capacity using HDD quota management. This function lets you
allocate different storage capacities for both recordings and snapshots to each camera.
Note
: If the overwrite function is enabled, the maximum capacity for both recordings and
snapshots is set to zero by default.
Summary of Contents for interlogix TruVision DVR 44HD
Page 1: ...TruVision DVR 44HD User Manual P N 1072968 EN REV B ISS 11AUG15...
Page 174: ......
