United Technologies interlogix TruVision DVR 44HD User Manual Download Page 18

Page: 18 / 174

Chapter 3: Getting started

TruVision DVR 44HD User Manual

Check the

Constant Recording

checkbox for the recorder to record continuously all day. If

left unchecked, the recorder will not record.

Check the desired time lapse check box

TL-Hi

TL-Lo

To record motion detection events, check

Event (Motion)

To record alarm events, check

Alarm

Click

Next

to move to the next page, or

Previous

to return to the previous page.

Note

: You can configure the recording parameters of each individual camera for the

different recording schedules in the recording menu.

9. When all the required changes have been entered, a summary page appears showing all

the settings.

Click

Finish

to exit the Wizard. The recorder is now ready to use.

For a description of the recorder main menu, see “Menu overview” on page 24.

Summary of Contents for interlogix TruVision DVR 44HD















































































































































































Search results

Summary of Contents for interlogix TruVision DVR 44HD

Reviews:

Related manuals for interlogix TruVision DVR 44HD

Brands by name

Popular brands

United Technologies interlogix TruVision DVR 44HD, User Manual

Search results

Summary of Contents for interlogix TruVision DVR 44HD

Reviews:

Related manuals for interlogix TruVision DVR 44HD

Brands by name

Popular brands