Chapter 13: Alarm and event setup
94
TruVision DVR 44HD User Manual
To set up an alarm output:
1. From the menu toolbar, click
Alarm & Event Setup
>
Alarm Output
.
2. Select the alarm output.
3. Select a timeout option between 5 and 600 seconds or select “Manually Clear”.
The timeout setting lets you define how long an alarm signal remains active after the alarm
has ended. If you select
Manually Clear
, the alarm signal remains active until it is manually
acknowledged by pressing the alarm button on the front panel or remote control (see
“Triggering or clearing alarm outputs manually” below).
4. Select the recording schedules for the alarm output.
Click the
Actions
button and select the day of the week and the time periods during the day
when motion can be recorded. You can schedule up to eight time periods in a day. Default
is 24 hours.
Click
Apply
to save the settings. Click
Copy
to copy the settings to other days of the week
and holiday period.
Note:
The time periods defined cannot overlap.
5. Click
OK
to return to the alarm output window.
6. Click
Copy
to copy these settings to other cameras, if required, and then click
Apply
to
save the changes.
7. Click
Exit
to return to live view.
Manual trigger
The manual trigger menu allows you to manually trigger outputs of the recorder.
To trigger or clear alarm outputs manually:
1. From the menu toolbar, click
Alarm & Event Setup
>
Manual Trigger
.
2. Select the desired alarm output and click the following buttons:
Trigger / Clear
: Trigger an alarm output or stop an alarm output. As there is only one alarm
output available, the “Trigger All” button just triggers the one output.
Clear All
: Stop all alarm outputs at once.
3. Click
Exit
to return to live view. The alarm is silenced.
- Or -
Press the
Alarm
button on the front panel or remote control. The alarm is silenced.
Summary of Contents for interlogix TruVision DVR 44HD
Page 1: ...TruVision DVR 44HD User Manual P N 1072968 EN REV B ISS 11AUG15...
Page 174: ......
