United Technologies interlogix TruVision DVR 44HD, User Manual

Page: 25 / 174

Chapter 4: Operating instructions
TruVision DVR 44HD User Manual 23
Item Description
5. Mon A and Mon B Switch between monitors A and B.
6. Live Return to live view mode.
7. Menu Activate the main menu.
8. Seq Start /stop sequencing.
9. , , , In Menu mode: Use left or right arrow buttons to select and up or down arrow
buttons to edit entry.
In PTZ mode: Use to control PTZ.
In Playback mode: Use to control playback speed.
10. OK Confirm selection.
11. Zoom + and - Use to control zoom of camera lens.
12. Preset Enter preprogrammed three-digit code to call up a preset.
13. Tour Enter preprogrammed three-digit code to call up shadow tour.
14. Focus + and - Use to control focus of camera lens.
15. Playback control Use to control playback (Rewind, Pause, Play, and Fast Forward).
16. Search Open the Search menu.
17. Replay Replay the selected file from the beginning.
18. Eject Eject the CD or DVD disk.
19. Archive Press once to enter quick archive mode. Press twice to start archiving.
Aim the remote control at the IR receiver located at the front of the unit to test operation.
To change the address of the remote control to the recorder:
1. Press the Menu button on the front panel or right-click the mouse and select the Menu
button. The default display menu window appears.
2. Click Device Management > General Settings .
3. Check the remote control ID value. The default value is 255. This device address is valid for
all IR controls.
Note : The recorder will respond to any remote control that has an address between 1 and
255.
4. On the remote control, press the Device button.
5. Enter the device address value. It must be the same as that on the recorder.
6. Press the OK button on the remote control.
To place batteries into the IR remote control:
1. Remove the battery cover.
2.
Insert the batteries. Make sure that the positive (+) and negative (−) poles are correctly
placed.
3. Replace the battery cover.