Appendix E: KTD-405 keypad
TruVision DVR 44HD User Manual
145
Figure 38: Keypad and recorder connections
A. KTD-405 keypad
B. RS-232 programming port
C. RS-485 and RS-422 in/out
D. RS-485 termination switch
E. RJ45 cable control (use the cable provided with
the equipment)
F. I/O box
G. Recorder back panel
See “Connecting a KTD-405 keypad and dome camera to the recorder” on page 151 for
information on how to connect both a keypad and dome camera to the recorder.
Setting the keypad to work with the recorder
The keypad must be in zone mode to connect correctly with the recorder.
Further information on connecting and programming the KTD-405 keypad can be found in the
user manual.
To set the keypad in zone mode:
1. Log into the keypad using the Admin password. Hold down the Enter button
(
) until a beep sounds and then enter the following code: 1 4 7 6. Push the
seq
button
to confirm.
2. Scroll through the menus with the
button until this menu appears:
Summary of Contents for interlogix TruVision DVR 44HD
Page 1: ...TruVision DVR 44HD User Manual P N 1072968 EN REV B ISS 11AUG15...
Page 174: ......
