Chapter 10: Camera setup
TruVision DVR 44HD User Manual
77
Note
: It is not recommended to use the V-stream feature when an analog monitor is used as a
main monitor because the analog main monitor and the V-stream use the same output.
To enable V-streaming:
1. Click the
Display Settings
>
V-stream Encoding
.
2. Check
Enable V-stream Encoding
.
3. Select
the desired settings for frame rate and maximum bit rate (Kbps).
4. Click
Apply
to save the settings and
Exit
to return to live view.
To configure V-streaming:
The V-stream shows video on the recorder’s BNC output.
1. Click the
Display Settings
>
Display
>
Video Output Interface
and select
Main BNC
.
2. Under
Default View
, select the desired view format.
3. Under
Sequence Dwell Time
, select the desired camera sequence mode.
Note
: Sequencing can only be done in single-view display mode.
4. Click the
Display Settings
>
Layout
>
Video Output Interface
and select
Main BNC
.
5. Select the desired sequence order of the cameras.
6. Click
Apply
to save the settings and
Exit
to return to live view.
Summary of Contents for interlogix TruVision DVR 44HD
Page 1: ...TruVision DVR 44HD User Manual P N 1072968 EN REV B ISS 11AUG15...
Page 174: ......
