Chapter 11: Network settings
TruVision DVR 44HD User Manual
79
2. Enter the required settings:
Option
Description
1. NIC Type
Network interface card (NIC) is a device used to connect the recorder to a
network. Select the NIC type used from the drop-down list.
Default value is 10/100M self-adaptive for the 4 channel recorder and
10/100/1000M self-adaptive for the 8 or 16 channel recorders.
2. Enable DHCP
DHCP (Dynamic Host Configuration Protocol) is a protocol for assigning an IP
address dynamically to a device each time it connects to a network.
Check this box if you have a DHCP server running and want your recorder to
automatically obtain an IP address and other network settings from that server.
The DHCP server is typically available in your router.
Default value is Disable.
3. IPv4 Address
Enter the IP address for the recorder. This is the LAN IP address of the recorder.
Default value is 192.168.1.82.
4. IPv4 Subnet Mask
Enter the subnet mask for your network so the recorder will be recognized within
the network.
Default value is 255.255.255.0.
5. IPv4 Default
Gateway
Enter the IP address of your network gateway so the recorder will be recognized
within the network. This is typically the IP address of your router. Consult your
router user manual or contact your ISP to get the required information on your
gateway.
Default value is 192.168.1.1.
6. MAC Address
Displays the MAC address. The MAC address is a unique identifier of your
recorder and it cannot be changed.
7. Preferred DNS
Server
Enter the preferred domain name server to use with the recorder. It must match
the DNS server information of your router. Check your router’s browser interface
or contact your ISP for the information.
8. Server Port
Use the server port for remote client software access. The port range is between
1024 and 65535.
Enter the server port value. The default value is 8000.
Summary of Contents for interlogix TruVision DVR 44HD
Page 1: ...TruVision DVR 44HD User Manual P N 1072968 EN REV B ISS 11AUG15...
Page 174: ......
