TV One C2-5000 Series, Operation Manual

Page: 39 / 116

C2-5000 Series Universal Scaler Operation Manual
39
11.0 SUB MENUS
There are six sub menus used in conjunction with the Top Menu:
Setup Program Source
Adjust Scaler Parameters
Adjust Lock / Overlay
Adjust Buttons
Adjust Image Parameters
System
Rotating the Menu Select knob to the right from the Banner Screen and then
pressing the knob selects one of the sub menus.
12.0 SETUP PROGRAM SOURCE SUB MENU
Sub menu
Setup Program source
Rotating the knob to the right from the Banner Screen eventually takes you to the
Setup Program source screen. From here, each input parameter can be adjusted
plus the changes can be stored in non-volatile memory.
Inputs are grouped by characteristics: RGB signals have different adjustment
parameters than do Composite Video and YC video signals and, if you have the
C2-5200 Scaler, you have yet another type of signal, the SDI input, that has its
own set of parameters.
It isn’t necessary to drill down within the Setup Program source sub menu to
reach the proper grouping. As you select inputs, the Scaler displays what type of
signal you are using and presents you with the proper set of adjustment choices
for the signal. The headings that follow will show what types of signals are
adjustable for each sub menu.
Remember: you must first select Setup Program
Source from the Top Menu to be able to change any of the following settings.
For the purpose of this manual, we are using the Factory Default settings to
explain the sub menus. If you wish to duplicate the signal input structure shown
here (the signal type shown in parentheses on the screen display replication),
please perform a factory reset.
12.1 Autoset Status (RGB Only)
From the Setup Program Source screen, pressing the Menu Select knob will
display the first in the series of Program Source adjustment screens. This first