TV One C2-5000 Series, Operation Manual

Page: 62 / 116

C2-5000 Series Universal Scaler Operation Manual
62
This action has now stored all of the Scaler settings to memory. They will be the
settings that are recalled when the Restore button (9) is pressed.
The next step is to set the lock source and method associated with button
number 8 so we next go to the Lock Source Menu:
1024x768 60 Hz
Lock Source [RGB1]
Confirm that the Lock source is set to RGB1 and then rotate the knob one detent
to the right where you will see the following screen:
1024x768 60 Hz
Lock Method [Off]
Press the Menu Select knob and the brackets will start to flash. When they are
flashing, rotate the knob to the right until you see PIP between the brackets.
Press and hold button number 8 until you hear a Beep and the following
message is displayed
Info:
Added to Preset
The Scaler has now accepted the first layer of information associated with button
number 8’s preset.
If the brackets are still flashing on the LCD panel, press the Menu Select knob
once to stop the flashing and then rotate the knob until you arrive at the Adjust
Scaler Parameters display on the LCD screen.
Sub menu . . .
Adjust Scaler parameters
Press the Menu Select knob once and then rotate it until you are parked on the
Shrink Level Screen:
Adjust Scaler parameters
Shrink level % [100]
Press the Menu Select knob and observe that the brackets begin to flash. When
they do, rotate the knob to the left until the foreground image has shrunk to 30%
normal size as evidenced by the LCD display:
Adjust Scaler parameters
Shrink level % [ 30]