TV One C2-5000 Series, Operation Manual

Page: 34 / 116

C2-5000 Series Universal Scaler Operation Manual
34
selections within the top menu and various sub menus actually “do”. Once that is
sorted out, you’ll be an expert with the Universal Scaler in no time.
10.0 THE TOP MENU
The Top Menu is the first menu level. From here, you can make several universal
settings and also branch out to the various sub menus. Rotate the Menu Select
knob one detent to the right to progress through the Top Menus, pressing the
knob once to select the menu of interest.
10.1 Banner Screen
When you first apply power to the Universal Scaler, the LCD screen will be
parked on the Banner Screen. It will always have the same information displayed
and cannot be changed. The Banner screen will look like this:
CORIO2 C2-5100
TV One
(A C2-5200 has the same screen but will indicate that the Scaler is a C2-5200
model instead of C2-5100).
10.2 Software and Hardware Version Screen
Turning the Menu Select knob to the right one detent will bring up a screen that
displays the Software and Hardware version numbers. When new software is
available from the support website, you should compare the version number of
the new software to the software currently installed on your Scaler. The features
of the new software version will be listed on the website so that you can decide
whether or not you wish to upgrade. Information on the upgrade procedure,
directions explaining how to register and the URL of the website will be covered a
bit later in this manual.
www.tvone.com
SW 162, PT: 3 BT: 6
In the screen example shown above, the “SW 162” portion of the display refers to
the software revision number. The “PT: 3 and BT: 6” portions of the sample
display refer to the Hardware version number. You cannot upgrade the hardware
however it’s useful information in the event you contact our Technical Support
group.