FTS-B179-2
Issue 2:December 2002
S233 Ribbon Splitter
Operating Instructions
Please read entire manual prior to usage.
This manual must be kept with the S233 Ribbon Splitter.
Safety Instructions
This manual contains the complete operating and maintenance instructions for S233 Ribbon Splitter. Please
review this manual carefully before operating the S233 Ribbon Splitter .
The following safety instructions must be observed whenever this product is operated, serviced or repaired.
Failure to comply with any of these instructions or with any precaution or warning contained in this manual
is in direct violation of the standards of the design, the manufacture and the intended use of the instrument.
THE FURUKAWA ELECTRIC CO., LTD. assumes no liability for the customer’s failure to comply with these
requirements.
Safety Instructions
!
CAUTION
Failure to comply with any of the instructions, which are
indicated by this symbol, may cause serious injury or
damage to the machine.
Please contact THE FURUKAWA ELECTRIC CO., LTD. with any questions relating to the description of this
manual.
In no case will THE FURUKAWA ELECTRIC CO., LTD. be liable to the buyer, for any consequential or
indirect damage which is caused by product failure, malfunction, or any other problem.
!
CAUTION
Avoid soaking the S323 with water. Doing so may cause malfunction.
Do not use in a humid, dirty or vibration site. Doing so may cause fire, electrical shock or
malfunction.
Do not drop, throw, and punish. Doing so may cause malfunction.
Ensure that cleaning the S233 Ribbon Splitter and splitted ribbon fiber, before splitting. If not doing
so, it may occur that fiber breaking or irreguler splitting, because of dust.
Do splitting slowly. If ribbon fiber cannot be split smoothly, interrupt splitting and do cleaning. If
smoothness is not recovered, it has the possibility that S233 Ribbon Splitter's malfunction or ribbon
fiber's transforming. Stop splitting till the cause is cleared. If splitting is done with continue, it may
occur fiber breaking or add the damage to fiber.
Do cleaning S233 Ribbon Splitter by exclusive brush, not using another tool such as screwdriver.
S233 Ribbon Splitter is designed with special attention for not damage to the fiber. But there are
possibility of added the damage to the fiber, in condition of fiber, cleaning, and S233 itself. So please
use S233 with considering
There are possibility of add the damage to the fiber, or impossible to split, because of condition of
fiber, cleaning, and S233 itself. So please use S233 with deep understanding of those matters.
Don’t apply S233 for living line.
•
•
•
•
•
•
•
•
•
