TriContinent C24000, Product Manual

Page: 84 / 144

Report commands (query commands)
84
Operating instructions
?22 Non-functional. Always reports 255.
?23, &, or
RV Reports firmware version. Format is “C3000: MMDDYY”
where:
MM = month
DD = day
YY = year
Note: C3000 is the response regardless of whether the actual pump is a
C3000/C3000MP or C24000/C24000MP configuration.
?24 Reports gap volume set with [k].
?25 Reports syringe motor hold current [h] in % of max.
?26 Reports syringe motor run current [m] in % of max.
?27 or ?76 Reports the confirmation EEPROM data set by the [u] command.
?28 Reports state of the 3-port valve jumper (J2, segment 5).
3 = 3-port valve; jumper installed.
4 = other valves, jumper not installed
?29 or Q Reports system status. Reports error codes and pump status (idle or
busy). Also see "Status and error codes"below.
?30 [s0] string. Reports command string stored in EEPROM location 0.
?31 [s1] string. Reports command string stored in EEPROM location 1.
?32 [s2] string. Reports command string stored in EEPROM location 2.
?33 [s3] string. Reports command string stored in EEPROM location 3.
?34 [s4] string. Reports command string stored in EEPROM location 4.
?35 [s5] string. Reports command string stored in EEPROM location 5.
?36 [s6] string. Reports command string stored in EEPROM location 6.
?37 [s7] string. Reports command string stored in EEPROM location 7.
?38 [s8] string. Reports command string stored in EEPROM location 8.
?39 [s9] string. Reports command string stored in EEPROM location 9.
?40 [s10] string. Reports command string stored in EEPROM location 10.
?41 [s11] string. Reports command string stored in EEPROM location 11.
?42 [s12] string. Reports command string stored in EEPROM location 12.
?43 [s13] string. Reports command string stored in EEPROM location 13.
?44 [s14] string. Reports command string stored in EEPROM location 14.
Table 5-12: Report commands (continued)
Report
Command
Report description