manualshive.com logo in svg

TriContinent C24000, Product Manual

Share
Download
TriContinent C24000 Product Manual Download Page 12

Features and facilities

Product overview

12

The C-Series hardware and firmware automatically detect the communication 
interface and communication protocol. The pump can be configured to operate 
at different communication speeds. 

There are currently four models of the C-Series Precision Syringe Pumps: C3000. 
C3000MP, C24000, and C24000MP.

C3000. 

The C3000 provides all normal aspiration and dispensing operations 

expected from an OEM syringe pump module. The stepper motor-driven syringe 
will accurately and precisely handle fluid capacities from a few microliters to 12.5 
milliliters. The syringe drive arm can be easily back driven, making syringe instal-
lation or replacement extremely quick and easy. The C3000 supports valves with 
3 or 4 ports.

C3000MP (C3000 Multiport). 

The C3000MP provides all of the features 

of the C3000 but is designed to support a 6-way distribution valve.

C24000. 

The C24000 is a high-resolution version of the C3000 that achieves 

full syringe resolution to 192,000 increments/full stroke. The C24000 is ideal for 
achieving low flow rate and low pulsation requirements. The C24000 supports 
valves with 3 or 4 ports.

C24000MP (C24000 Multiport). 

This model has all the features of the 

C24000 but is designed to support a 6-way distribution valve.

Features and facilities

Each pump provides two digital inputs and three outputs that can be used for 
synchronization with external devices (see Figure 3-2.) Multi-pump communica-
tion is possible over an RS485 or CAN bus. The built-in RS232 interface will auto-
matically convert to RS485. With an optional converter, USB communication can 
also be accommodated.

Other features

•

Proprietary high-efficiency and maintenance-free direct drive system

•

Long-life rotary shear valves (up to 24 times the life of competing valves)

•

Valve drive < 250 ms between neighboring ports

•

High resolution options available up to 192,000 increments/full stroke

•

Up to 15 pumps on a bus; can be addressed individually

•

Syringe sizes from 50 

µ

L to 12.5 mL

•

LED indicators to assist in monitoring function and providing notification of spe-
cific error conditions.

Summary of Contents for C24000

















































































































































Reviews:

No comments

Brands by name

Popular brands

Load more brands