manualshive.com logo in svg

Toshiba E-studio5530cPRO, Operating Instructions Manual, Page: 95 / 324

Share
Download
Toshiba E-studio5530cPRO Operating Instructions Manual Download Page 95

3. Copier/Document Server Features

This chapter describes user tools in the Copier / Document Server Features menu. For details on how to
access Copier / Document Server Features, see "Accessing User Tools".

General Features

This section describes the user tools in the General Features menu under Copier / Document Server
Features.
Default settings are shown in bold type.

Auto Image Density Priority

You can set whether Auto Image Density is "On" or "Off" when the machine is turned on, reset, or
modes are cleared.
The default setting for "Full Color: Photo" is Off.
The default setting for "Full Color: Non-photo" is Off.
The default setting for "B&W: Photo" is Off.
The default setting for "B&W: Non-photo" is On.

Original Type Priority

You can select the original type effective when the power is turned on, or modes cleared.
The default setting for "Full Color" is Text / Photo.
The default setting for "B&W " is Text / Photo.

Original Photo Type Priority

When you select "Text / Photo" or "Photo" in "Original Type Priority", you can change the settings of
the selected original type.
The default setting for "Text / Photo" is Printed Photo.
The default setting for "Photo" is Printed Photo.

Original Type Display

You can have the original types shown on the initial display.
The default setting is Display.
If you select [Hide], the display is as below.

93

3

Summary of Contents for E-studio5530cPRO





































































































































































































































































































































Reviews:

No comments