manualshive.com logo in svg

Toshiba E-studio5530cPRO, Operating Instructions Manual, Page: 293 / 324

Share
Download
Toshiba E-studio5530cPRO Operating Instructions Manual Download Page 293

Registering SMTP and LDAP Authentication

This section describes how to register SMTP and LDAP Authentication.

SMTP Authentication

This section describes how to register SMTP Authentication.
For each user registered in the Address Book, you can register a login user name and login password to
be used when accessing an SMTP server.
To use an SMTP server, you need to program it beforehand.

• When [Do not Specify] is selected for SMTP Authentication the User Name and Password that you

have specified in SMTP Authentication of File Transfer settings applies. For details, see "File Transfer".

1.

Press [System Settings].

2.

Press [Administrator Tools].

3.

Press [Address Book Management].

4.

Check that [Program / Change] is selected.

5.

Press the name you want to register or enter the registered number using the number keys.

You can search by the registered name, fax number, folder name, e-mail address, or IP-Fax
destination.

6.

Press [Auth. Info].

7.

Press [Specify Other Auth. Info] under "SMTP Authentication".

Registering SMTP and LDAP Authentication

291

7

Summary of Contents for E-studio5530cPRO





































































































































































































































































































































Reviews:

No comments