manualshive.com logo in svg

Toshiba E-studio5530cPRO, Operating Instructions Manual, Page: 253 / 324

Share
Download
Toshiba E-studio5530cPRO Operating Instructions Manual Download Page 253

• p.251 "To change the IP-Fax Destination"
• p.251 "To change the protocol"
• p.251 "To program the SUB Code"
• p.252 "To program the SEP Code"
• p.252 "To set the International TX Mode"
• p.252 "To select the fax header"

Using the IP-Fax Destination as the sender

This section describes how to use the IP-Fax destination as the sender.

1.

Press [Protection].

2.

Press [Sender] under "Use Name as".

To change the IP-Fax Destination

This section describes how to change a registered IP-Fax destination.

1.

Press [Change] under "Use Name as".

2.

Enter the new destination, and then press [OK].

To change the protocol

This section describes how to select the protocol.

1.

Press [Select Line].

2.

Select [H.323] or [SIP].

To program the SUB Code

This section describes how to program the SUB Code.

1.

Press [Adv. Features], and then press [SUB Code].

2.

Press [Change] under "TX SUB Code".

3.

Enter the SUB Code, and then press [OK].

4.

To enter a password, press [Change] under "Password (SID)".

5.

Enter a password using the number keys, and then press [OK].

6.

Press [OK].

Fax Destination

251

7

Summary of Contents for E-studio5530cPRO





































































































































































































































































































































Reviews:

No comments