Toshiba E-studio5530cPRO, Operating Instructions Manual, Page: 50 / 324

Paper Type: Tray 2-3
Sets the display so you can see what type of paper is loaded in each paper tray.
The print function uses this information to automatically select the paper tray.
The paper types you can set for the paper tray 2-3 are as follows:
• No Display, Recycled Paper, Color Paper 1, Color Paper 2, Letterhead, Preprinted Paper, Bond
Paper, Cardstock, Prepunched Paper, Special Paper 1, Special Paper 2, Tab Stock
The paper thicknesses you can set for the paper tray 2-3 are as follows:
• Thin Paper (52.3 65.9 g/m
2
) (13.9 17.9 lb.Bond, 19.3 23.9 lb.Cover, 28.9 36.4
lb.Index)
• Plain Paper 1 (66.0 80.9 g/m
2
) (18 21.9 lb.Bond, 24 29.9 lb.Cover, 36.5 44.9 lb.Index)
• Plain Paper 2 (81.0 100.9 g/m
2
) (22 26.9 lb.Bond, 30 37 lb.Cover, 45 55.9 lb.Index)
• Middle Thick (101.0 127.4 g/m
2
) (27 33.9 lb.Bond, 37.1 46.9 lb.Cover, 56 70.4
lb.Index)
• Thick Paper 1(127.5 163.9 g/m
2
) (34 43.9 lb.Bond, 47 60 lb.Cover, 70.5 90.4 lb.Index)
• Thick Paper 2 (164 216 g/m
2
) (44 57.6 lb.Bond, 60.1 80 lb.Cover, 90.5 119.3 lb.Index)
The default setting for "Paper Type" is No Display.
The default setting for "Paper Thickness" is Plain Paper 1.
The default setting for "Apply Duplex" is Yes.
The default setting for "Apply Auto Paper Select" is Yes.
The key mark is displayed next to the paper tray if [No] is selected in "Auto Paper Select".
The optional tab sheet holder is required when using tab stock in tray 2 or 3.
The number of tab stock shifts can be set in millimeters, when [Tab Stock] has been selected.
The number of tab stock shift can be set in 1 millimeter (1 inch) units, within a range of 0 to 15 mm
(0" to 0.6"). The default is 13 mm (0.5").
Auto Paper Select can only be selected for the copier function if [No Display] and [Recycled Paper]
are selected. If [No] is selected, Auto Paper Select is not valid.
For details about the relations between possible paper sizes and thickness, see "Recommended Paper
Sizes and Types", About This Machine.
For details about the recommended conditions for using thick paper, see "Thick Paper", About This
Machine.
Paper Type: LCT (When the large capacity tray is installed.)
Sets the display so you can see what type of paper is loaded in the large capacity tray (LCT).
The print function uses this information to automatically select the paper tray.
The paper types you can set for the large capacity tray (LCT) are as follows:
2. System Settings
48
2