manualshive.com logo in svg

Toshiba E-studio5530cPRO, Operating Instructions Manual, Page: 147 / 324

Share
Download
Toshiba E-studio5530cPRO Operating Instructions Manual Download Page 147

For documents sent using a gateway to G3 Fax, prefixes can be used. If the first several
digits of IP-Fax number and the gateway- specific prefix are identical, documents can be
transmitted using the registered digits of the gateway. For example, if both 03 and 04 have
been registered as gateway number while 0312345678 is also specified, documents can
be transmitted via a gateway for which 03 is used as a prefix.
When you wish to use the gateways regardless of the IP-Fax destination numbers, register
only the gateway addresses without registering the prefix.

8. Select a protocol.

9. Press [Change] for "Gateway Address".

10. Enter the gateway address, and then press [OK].
11. Press [OK].
12. Press the [User Tools/Counter] key.

• Delete

1. Press [Facsimile Features].
2. Press [Initial Settings].
3. Press [Program / Change / Delete Gateway].
4. Press [Delete], and then select a gateway to delete.
5. Press [Yes] on the confirmation message.

If you do not want to delete the gateway you have selected, press [No].

6. Press [Exit].
7. Press the [User Tools/Counter] key.

E-mail Setting

Set whether or not to use "E-mail" in the fax functions.
The default setting is Off.

Folder Setting

Set whether or not to use "folder" in the fax functions.
The default setting is Off.

Initial Settings

145

4

Summary of Contents for E-studio5530cPRO





































































































































































































































































































































Reviews:

No comments