Toshiba E-studio5530cPRO Operating Instructions Manual Download Page 206

Page: 206 / 324

Maintenance

This section describes the user tools in the Maintenance menu under Printer Features.
Default settings are shown in bold type.

List / Test Print Lock

You can lock the [List / Test Print] menu.
The default setting is Off.

Delete All Temporary Print Jobs

You can delete all print jobs temporarily stored in the machine.

Delete All Stored Print Jobs

You can delete all print jobs stored in the machine.

4 Color Graphic Mode

• Text Priority

Use the optimum CMYK toner combination for text printing.

• Photo Priority

Use the optimum CMYK toner combination for photo printing.

The default setting is Photo Priority.

• p.12 "Accessing User Tools"

5. Printer Features

204

Summary of Contents for E-studio5530cPRO





































































































































































































































































































































Search results

Summary of Contents for E-studio5530cPRO

Reviews:

Toshiba E-studio5530cPRO, Operating Instructions Manual, Page: 206 / 324

Search results

Summary of Contents for E-studio5530cPRO

Reviews: