manualshive.com logo in svg

Toshiba E-studio5530cPRO, Operating Instructions Manual, Page: 194 / 324

Share
Download
Toshiba E-studio5530cPRO Operating Instructions Manual Download Page 194

5.

Select the box to program.

When programming a new box, press [Not Programmed].

To change a box already programmed, press it, and then proceed to step 8. If a password is
programmed, enter the password, press [OK], and then proceed to step 8.

6.

Press [Information Box].

7.

Enter a box name, and then press [OK].

8.

Enter the SEP Code.

To change the SEP Code, press [Clear] or the [Clear/Stop] key, and then try again. To change the
box name, press [Box Name], and then repeat the procedure from step 7.

9.

Press [Password].

If you do not want to program a password, proceed to step 12.

4. Facsimile Features

192

4

Summary of Contents for E-studio5530cPRO





































































































































































































































































































































Reviews:

No comments