manualshive.com logo in svg

Toshiba E-studio5530cPRO, Operating Instructions Manual, Page: 229 / 324

Share
Download
Toshiba E-studio5530cPRO Operating Instructions Manual Download Page 229

Registering Names

Register user information including their names.
The user name is useful for selecting a destination when sending faxes or e-mail.
You can also use it as a folder destination.
You can register up to 2000 names.

Registering Names

This section describes how to register names.

1.

Press [System Settings].

2.

Press [Administrator Tools].

3.

Press [Address Book Management].

4.

Check that [Program / Change] is selected.

5.

Press [New Program].

6.

Press [Change] on the right of the Name.

The name entry display appears.

7.

Enter the name, and then press [OK].

Registering Names

227

7

Summary of Contents for E-studio5530cPRO





































































































































































































































































































































Reviews:

No comments