manualshive.com logo in svg

Toshiba E-studio5530cPRO, Operating Instructions Manual, Page: 213 / 324

Share
Download
Toshiba E-studio5530cPRO Operating Instructions Manual Download Page 213

The default setting is 10.00 pitches.

Symbol Set

Specify the character set of the selected font. The available options are as follows:

• Roman-8, ISO L1, ISO L2, ISO L5, PC-8, PC-8 D/N, PC-850, PC-852, PC8-TK, Win L1, Win

L2, Win L5, Desktop, PS Text, VN Intl, VN US, MS Publ, Math-8, PS Math, VN Math, Pifont,
Legal, ISO 4, ISO 6, ISO 11, ISO 15, ISO 17, ISO 21, ISO 60, ISO 69, Win 3.0

The default setting is PC-8.

Courier Font

You can select a courier font type.
The default setting is Regular.

Extend A4 Width

You can extend the printing area width (when printing on A4 sheet with PCL).
The default setting is Off.
When the setting is On, the width will be 8

1

/

2

 inches.

Append CR to LF

When set to On, a carriage return will follow each line feed: CR=CR, LF=CR-LF, FF=CR-FF.
The default setting is Off.

Resolution

You can set the print resolution in dots per inch.
The default setting is 600 dpi (Standard).

• p.12 "Accessing User Tools"

PCL Menu

211

5

Summary of Contents for E-studio5530cPRO





































































































































































































































































































































Reviews:

No comments