manualshive.com logo in svg

Toshiba E-studio5530cPRO, Operating Instructions Manual, Page: 263 / 324

Share
Download
Toshiba E-studio5530cPRO Operating Instructions Manual Download Page 263

1.

Press [System Settings].

2.

Press [Administrator Tools].

3.

Press [Address Book Management].

4.

Check that [Program / Change] is selected.

5.

Select the name whose folder you want to register.

Press the name key, or enter the registered number using the number keys.

6.

Press [Auth. Info], and then press [ Next].

7.

Press [Specify Other Auth. Info] on the right side of Folder Authentication.

When [Do not Specify] is selected, the SMB User Name and SMB Password that you have specified
in Default User Name / Password (Send) of File Transfer settings applies.

8.

Press [Change] under "Login User Name".

9.

Enter the login user name, and then press [OK].

10.

Press [Change] under "Login Password".

11.

Enter the password, and then press [OK].

12.

Enter the password again to confirm, and then press [OK].

13.

Press [Folder].

14.

Press [SMB].

To specify a folder, you can either enter the path manually or locate the folder by browsing the
network.

Registering Folders

261

7

Summary of Contents for E-studio5530cPRO





































































































































































































































































































































Reviews:

No comments