manualshive.com logo in svg

Toshiba E-studio5530cPRO, Operating Instructions Manual, Page: 255 / 324

Share
Download
Toshiba E-studio5530cPRO Operating Instructions Manual Download Page 255

7.

Press [Change] under "Line 3".

8.

Select the new standard message, and then press [OK].

9.

Press [OK].

• To change the name, key display and title, see "Changing a Registered Name".

• p.228 "Changing a Registered Name"

Deleting a Registered IP-Fax Destination

This section describes how to delete a registered IP-Fax destination.
If you delete a destination that is a specified delivery destination, messages to its registered Personal Box,
for example, cannot be delivered. Be sure to check the settings in the fax function before deleting any
destinations.

1.

Press [System Settings].

2.

Press [Administrator Tools].

3.

Press [Address Book Management].

4.

Press [Program / Change].

5.

Select the name whose IP-Fax destination you want to delete.

Press the name key, or enter the registered number using the number keys.
You can search by the registered name, fax number, folder name, e-mail address, or IP-Fax
destination.

6.

Press [Fax Dest.].

7.

Press [Change] under "Fax Destination".

8.

Press [Delete All], and then press [OK].

9.

Press [OK].

10.

Press [Exit].

Fax Destination

253

7

Summary of Contents for E-studio5530cPRO





































































































































































































































































































































Reviews:

No comments