manualshive.com logo in svg

Toshiba E-studio5530cPRO, Operating Instructions Manual, Page: 85 / 324

Share
Download
Toshiba E-studio5530cPRO Operating Instructions Manual Download Page 85

Programming the Realm

This section describes how to specify the Realm settings.
Program the realm to be used for Kerberos authentication.
A realm is the network area in which Kerberos authentication is used. After confirming the network
environment, specify the necessary items.
You can register up to 5 realms.

Programming the Realm

This section describes how to program the Realm.

1.

Press [System Settings].

2.

Press [Administrator Tools].

3.

Press [ Next] twice.

4.

Press the [Program / Change / Delete Realm].

5.

Check that [Program / Change] is selected.

6.

Press [*Not Programmed].

7.

Press [Change] under "Realm Name".

Programming the Realm

83

2

Summary of Contents for E-studio5530cPRO





































































































































































































































































































































Reviews:

No comments