manualshive.com logo in svg

Toshiba E-studio5530cPRO, Operating Instructions Manual, Page: 197 / 324

Share
Download
Toshiba E-studio5530cPRO Operating Instructions Manual Download Page 197

BBM014S

Inform the Requesting Party of the SUB Code assigned to the Transfer Box. When they want to have a
document transferred by your machine, ask them to send the document using SUB Code Transmission and
specify this SUB Code. If a password has also been programmed, inform them of this too, and ask them
to enter it as the SID code.
You can store the following items:

• Box name (required)

Up to 20 characters.

• SUB Code (required)

Up to 20 characters long and can be composed of digits 0-9, "#", "*", and spaces (the first character
cannot be a space).

• End Receiver (required)

You can store five End Receivers (destinations to which documents are forwarded) for each box.
Specify End Receivers using a single or group destination programmed in the destination list
beforehand.

• Password (optional)

Up to 20 characters long and can be composed of digits 0-9, "#", "*", and spaces (the first character
cannot be a space).
When programming a password, a mark is displayed in front of the Box name.

1.

Press [Facsimile Features].

2.

Press [General Settings].

3.

Press [Box Setting].

4.

Check that [Program / Change] is selected.

5.

Select the box to program.

When programming a new box, press [Not Programmed].

Box Settings

195

4

Summary of Contents for E-studio5530cPRO





































































































































































































































































































































Reviews:

No comments