Toshiba E-studio5530cPRO Operating Instructions Manual Download Page 103

Page: 103 / 324

Creep Setting for Magazine

Specify the creep binding margin width.
The default setting is 5 mm (Metric version) / 0.2" (Inch version).

Erase Border Width

Specify the width of the erased border margins with this function.
The default setting is 10 mm (Metric version) / 0.4" (Inch version).

Erase Original Shadow in Combine

In Combine mode, you can specify whether to erase a 3 mm, 0.1" boundary margin around all four
edges of each original.
The default setting is On.

Erase Center Width

Specify the width of the erased center margins with this function.
The default setting is 10 mm (Metric version) / 0.4" (Inch version).

Front Cover Copy in Combine

You can make a combined copy on the front cover sheet when you select Front Cover mode.

BBM013S

The default setting is Combine.

Copy Order in Combine

You can set the copy order in Combine mode to Left to Right or Top to Bottom.

GCAH090E

The default setting is From Left to Right.

Edit

101

Summary of Contents for E-studio5530cPRO





































































































































































































































































































































Search results

Summary of Contents for E-studio5530cPRO

Reviews:

Toshiba E-studio5530cPRO, Operating Instructions Manual, Page: 103 / 324

Search results

Summary of Contents for E-studio5530cPRO

Reviews: