manualshive.com logo in svg

Toshiba E-studio5530cPRO, Operating Instructions Manual, Page: 230 / 324

Share
Download
Toshiba E-studio5530cPRO Operating Instructions Manual Download Page 230

8.

Press the key for the classification you want to use under "Select Title".

The keys you can select are as follows:

• [Frequent]: Added to the page that is displayed first.
• [AB], [CD], [EF], [GH], [IJK], [LMN], [OPQ], [RST], [UVW], [XYZ], [1] to [10]: Added to the list

of items in the selected title.

You can select [Frequent] and one more page for each title.

9.

Press [OK].

10.

Press [Exit].

11.

Press the [User Tools/Counter] key.

• The name can be used for documents in the Document Server. For details about the Document Server,

see "Using the Document Server", Copy/ Document Server Reference.

Changing a Registered Name

This section describes how to change a name.

1.

Press [System Settings].

2.

Press [Administrator Tools].

7. Registering Addresses and Users for Facsimile/Scanner Functions

228

7

Summary of Contents for E-studio5530cPRO





































































































































































































































































































































Reviews:

No comments