manualshive.com logo in svg

Toshiba E-studio5530cPRO, Operating Instructions Manual, Page: 74 / 324

Share
Download
Toshiba E-studio5530cPRO Operating Instructions Manual Download Page 74

5. Enter the new name, and then press [OK].
6. Press [OK].

Address Book: Switch Title

Specifies the title to select a name.
The default setting is Title 1.

Back Up / Restore Address Book

You can back up the machine's address book to external storage or restore the backup copy from
the external storage.
Backup requires a removable SD card to be installed in this machine.
For details about installing and removing the SD card, contact your sales or service representative.

• Back Up

You can back up the machine's address book onto an SD card.

• Restore

You can restore the backup copy of the address book from external storage.

• Format

You can format the external storage.

• Obtain Media Info

The free space and occupied space of the external storage are displayed.

• Restore data overwrites Address Book data stored on the machine, and clears the counter

of each registered user of the machine.

• You can also back up and restore the machine's Address Book using Web Image

Monitor or SmartDeviceMonitor for Admin. For details, see the Help files of Web Image
Monitor on the supplied CD-ROM or the Help files of SmartDeviceMonitor for Admin.

Display / Print Counter

Allows you to view and print the number of prints.

• Display / Print Counter

2. System Settings

72

2

Summary of Contents for E-studio5530cPRO





































































































































































































































































































































Reviews:

No comments