manualshive.com logo in svg

Toshiba E-studio5530cPRO, Operating Instructions Manual, Page: 111 / 324

Share
Download
Toshiba E-studio5530cPRO Operating Instructions Manual Download Page 111

• Inch version:

"Top Left" T/B: 0.1"-5.7", L/R: 0.1"-5.7"
"Top Center" T/B: 0.1"-5.7", L/R: 2.8"-2.8"
"Top Right" T/B: 0.1"-5.7", L/R: 0.1"-5.7"
"Center Left" T/B: 2.8"-2.8", L/R: 0.1"-5.7"
"Center" T/B: 2.8"-2.8", L/R: 2.8"-2.8"
"Center Right" T/B: 2.8"-2.8", L/R: 0.1"-5.7"
"Bottom Left" T/B: 0.1"-5.7", L/R: 0.1"-5.7"
"Bottom Center" T/B: 0.1"-5.7", L/R: 2.8"-2.8"
"Bottom Right" T/B: 0.1"-5.7", L/R: 0.1"-5.7"

• Page to Stamp

Sets whether to print the stamp on all pages or only the first page.
The default setting is All Pages.

Stamp Color: 1-4

Sets the color registered in User Stamp color (1 to 4).
The default setting is Black.

Date Stamp

This section describes the user tools in the Date Stamp menu under Stamp.

Format

You can select the date format for Date Stamp mode.
The default setting is DD / MM / YYYY (Metric version) / MM / DD / YYYY (Inch version).

Font

You can select the Date Stamp font.
The default setting is Font 1.

Size

You can set the Date Stamp size.
The default setting is Auto.

Superimpose

You can have the Date Stamp printed in white when it overlaps black parts of the image.
The default setting is Off.

Stamp Color

Sets the selected priority color when printing the date.

Stamp

109

3

Summary of Contents for E-studio5530cPRO





































































































































































































































































































































Reviews:

No comments