manualshive.com logo in svg

Toshiba E-studio5530cPRO, Operating Instructions Manual, Page: 260 / 324

Share
Download
Toshiba E-studio5530cPRO Operating Instructions Manual Download Page 260

10.

Press [Exit].

11.

Press the [User Tools/Counter] key.

• To change the name, key display and title, see "Changing a Registered Name".

• p.228 "Changing a Registered Name"

Using the e-mail address as the sender

This section describes how to use the e-mail address as a sender.

1.

Press [Protection].

2.

Press [Sender] under "Use Name as".

Deleting an E-mail Destination

This section describes how to delete an e-mail destination.

1.

Press [System Settings].

2.

Press [Administrator Tools].

3.

Press [Address Book Management].

4.

Check that [Program / Change] is selected.

5.

Select the name whose e-mail address you want to delete.

Press the name key, or enter the registered number using the number keys. You can search by the
registered name, fax number, folder name, e-mail address, or IP-Fax destination.

6.

Press [E-mail].

7.

Press [Change] under "E-mail Address".

8.

Press [Delete All], and then press [OK].

7. Registering Addresses and Users for Facsimile/Scanner Functions

258

7

Summary of Contents for E-studio5530cPRO





































































































































































































































































































































Reviews:

No comments