manualshive.com logo in svg

Toshiba E-studio5530cPRO, Operating Instructions Manual, Page: 290 / 324

Share
Download
Toshiba E-studio5530cPRO Operating Instructions Manual Download Page 290

Registering a Protection Code

This section describes how to register a Protection Code.
You can stop sender's names or folders being accessed by setting a protection code.
You can use this function to protect the following:

• Folders

You can prevent unauthorized access to folders.

• Sender's names

You can prevent misuse of sender's names.

• p.231 "Registering a User Code"

Registering a Protection Code to a Single User

This section describes how to register a Protection code to a single user.

1.

Press [System Settings].

2.

Press [Administrator Tools].

3.

Press [Address Book Management].

4.

Check that [Program / Change] is selected.

5.

Select the name whose protection code you want to register.

You can search by the registered name, fax number, folder name, e-mail address, or IP-Fax
destination.

7. Registering Addresses and Users for Facsimile/Scanner Functions

288

7

Summary of Contents for E-studio5530cPRO





































































































































































































































































































































Reviews:

No comments