manualshive.com logo in svg

Toshiba E-studio5530cPRO, Operating Instructions Manual, Page: 265 / 324

Share
Download
Toshiba E-studio5530cPRO Operating Instructions Manual Download Page 265

3.

Press [OK].

If the format of the entered path is not correct, a message appears. Press [Exit], and then enter the
path again.

• Enter the path using this format: "\\ServerName\Share-Name\PathName".
• You can also enter an IPv4 address.
• You can enter a path using up to 128 characters.

To locate the SMB folder using Browse Network

This section describes how to locate the SMB folder using Browse Network.

1.

Press [Browse Network].

The client computers sharing the same network as the machine appear.
Network display only lists client computers you are authorized to access.

2.

Select a client computer.

Shared folders under it appear.

You can press [Up One Level] to switch between levels.

3.

Select the folder you want to register.

4.

Press [OK].

If a Login Screen Appears

This section describes how to log on to the machine if the login screen appears when you try to access a
folder by browsing the network.
If you have not specified folder authentication, or if an incorrect user name or password has been entered
for folder authentication, the login screen appears.

Registering Folders

263

7

Summary of Contents for E-studio5530cPRO





































































































































































































































































































































Reviews:

No comments