manualshive.com logo in svg

Toshiba E-studio5530cPRO, Operating Instructions Manual, Page: 273 / 324

Share
Download
Toshiba E-studio5530cPRO Operating Instructions Manual Download Page 273

1.

Press [System Settings].

2.

Press [Administrator Tools].

3.

Press [Address Book Management].

4.

Check that [Program / Change] is selected.

5.

Select the name whose folder you want to delete.

Press the name key, or enter the registered number using the number keys.
You can search by the registered name, fax number, folder name, e-mail address, or IP-Fax
destination.

6.

Press [Folder].

7.

Press the protocol which is not currently selected.

A confirmation message appears.

8.

Press [Yes].

9.

Press [OK].

10.

Press [Exit].

11.

Press the [User Tools/Counter] key.

• To delete a name entirely, see "Deleting a Registered Name".

• p.229 "Deleting a Registered Name"

Using NCP to Connect

This section describes the procedure for registering, changing, and deleting NCP folders.

• To register a shared folder configured in Windows, see "Using SMB to Connect".
• To register a folder in an FTP server, see "Using FTP to Connect".

Registering Folders

271

7

Summary of Contents for E-studio5530cPRO





































































































































































































































































































































Reviews:

No comments