Toshiba e-Studio 332s User Manual Advanced Download Page 90

Page: 90 / 177

List of the Device Setting Menu Items

- 90 -

*1 "#n" or "#d" can be specified for [File Name].

When specifying "#n": 5-digit serial number between 00000 to 99999

When specifying "#d": Date and time when a file is created. 12 digits of yymmddhhmmss.

Example of file name specification (when the file format is PDF)

*2 To enable the changed setting, the network card must be restarted. Follow the instructions on

the confirmation screen displayed when changing the settings, and restart the network card.

Print From USB Memory Setup

Print Setup

yy:

Year created (the last 2 digits of
the Christian Era)

hh:

Hours created (00 to 23)

mm: Month created (01 to 12)

mm: Minute created (00 to 59)

dd: Date created (01 to 31)

ss:

Second created (00 to 59)

*A date and time when a file is created are values of the timer of e-STUDIO403S.

When specifying "Data#n":

Saved as file names such as "Data0000.pdf" and "Data00001.pdf",
etc.

When specifying "File#d":

saved as file names "File090715185045.pdf", etc.

When specifying "Scan":

"Scan.pdf" is created first, and then, data is saved with the name of
"Scan#d.pdf".For "#d", refer to the above.

When nothing is specified:

"Image.pdf" is created first and then, data is saved with the name of
"Image#d.pdf". For "#d", refer to the above.

Item

Factory

Default

Description

Default
Settings

Paper Feed

Tray 1

Sets the default feed tray.

Copies

Sets the number of copies.

Duplex

OFF

Sets whether to use the duplex function
by default.

Binding

Long edge
bind

Sets the default binding position for
duplex printing.

Fit

Sets whether to scale the page size of
documents to fit the paper size.

Item

Factory

Default

Description

Print
Menu

Tray Configura-
tion

Paper Feed

Tray 1

Selects the default feed tray.

Auto Tray Switch

Sets whether to enable the automatic tray
switch function.

Tray Sequence

Down

Sets the selection order priority for auto-
matic tray selection and automatic tray
switching.

MP Tray Usage
(e-STUDIO403S Only)

Do Not Use

[

When Mismatching

]: If a paper size or

type in a tray is not matched to that of the
print data, uses paper from the MP tray
instead of the specified tray.
[

Do Not Use

]: makes the MP tray

unavailable in auto tray selection or
switching.

Media Check

Enable

Sets whether to check the un-matching
between the paper size and the page size
of documents.

Summary of Contents for e-Studio 332s

















































































































































































Search results

Summary of Contents for e-Studio 332s

Reviews:

Related manuals for e-Studio 332s

Brands by name

Popular brands

Toshiba e-Studio 332s, User Manual Advanced

Search results

Summary of Contents for e-Studio 332s

Reviews:

Related manuals for e-Studio 332s

Brands by name

Popular brands