Toshiba e-Studio 332s User Manual Advanced Download Page 49

Page: 49 / 177

- 49 -

Printin

4. Printing

This chapter explains advanced printing operations.

Useful Operations for Printing From a Computer

This section explains useful operations when you print a document from a computer.

Memo

The display and procedure may differ according to the operating system, the applications, and the version of the printer driver

you are using. This section uses Wordpad and TextEdit in Windows and Mac OS X as examples.

For the e-STUDIO332S, "Mp tray" refers to the "Manual Feeder".

Reference

For additional information on the setting items on the printer driver, refer to its online help.

Manual Printing

You can print a document feeding paper

manually on the MP tray. The machine prints on a

sheet of paper at a time. Every time a page is

printed, a message appears requesting to load

paper on the MP tray. Select [

Start

] on the

message to continue to print.

Load paper on the MP tray.

Open the file you want to print.

Configure the print settings on the
printer driver and start printing.

For e-STUDIO332S Windows PCL/

PCL XPS Printer Driver

From the [

File

] menu, select [

Print

Click [

Preferences

On the [

Setup

] tab, select [

Manual

]

from [

Source

Configure other settings if necessary and

then start printing.

When a request message appears on the

operator panel for loading paper on the
MP tray, press the or to select
[

Start

] and then press .

If you print a document of multiple pages, every
time a page is printed the same message appears.

For e-STUDIO403S Windows PCL/

PCL XPS Printer Driver

From the [

File

] menu, select [

Print

Click [

Preferences

On the [

Setup

] tab, select

[

Multipurpose Tray

] from [

Source

Click [

Paper Feed Options

Select the [

Use MP tray as manual

feed

] check box and then click [

Configure other settings if necessary and

then start printing.

When a request message appears on the

operator panel for loading paper on the
MP tray, press the or to select
[

Start

] and then press .

If you print a document of multiple pages, every
time a page is printed the same message appears.

For Windows PS Printer Driver

From the [

File

] menu, select [

Print

Click [

Preferences

Select the [

Paper/Quality

] tab.

Select [

Multi-Purpose Tray

] from

[

Paper Source

Click [

Advanced

Click [

Multipurpose tray is handled as

manual feed

] and select [

Yes

] from the

drop-down list.

Click [

Configure other settings if necessary and

then start printing on the print dialog.

If a request message appears on the

operator panel for loading paper on the
MP tray, press the or to select
[

Start

] and then press .

If you print a document of multiple pages, every
time a page is printed the same message appears.

Summary of Contents for e-Studio 332s

















































































































































































Search results

Summary of Contents for e-Studio 332s

Reviews:

Related manuals for e-Studio 332s

Brands by name

Popular brands

Toshiba e-Studio 332s, User Manual Advanced

Search results

Summary of Contents for e-Studio 332s

Reviews:

Related manuals for e-Studio 332s

Brands by name

Popular brands