Toshiba e-Studio 332s User Manual Advanced Download Page 50

Page: 50 / 177

Useful Operations for Printing From a Computer

- 50 -

For e-STUDIO332S Mac OS X PCL

Printer Driver

From the [

File

] menu, select [

Print

Select [

Setup

] from the menu.

Select [

Manual Feed

] from [

Paper

Source

Configure other settings if necessary and

then start printing.

When a request message appears on the

operator panel for loading paper on the
Manual tray, press the or to select
[

Start

] and then press .

If you print a document of multiple pages, every
time a page is printed the same message appears.

For e-STUDIO403S Mac OS X PCL

Printer Driver

From the [

File

] menu, select [

Print

Select [

Setup

] from the menu.

Select [

Multi Purpose Tray

] from

[

Source

Click [

Paper Feed Options

Select [

MPT is Manual feed

] check box

and then click [

Configure other settings if necessary and
then start printing.

When a request message appears on the

operator panel for loading paper on the
MP tray, press the or to select
[

Start

] and then press .

If you print a document of multiple pages, every
time a page is printed the same message appears.

For Mac OS X PS Printer Driver

From the [

File

] menu, select [

Print

Select [

Paper Feed

] from the panel

menu.

Select [

All

] and then select [

Multi-

Purpose Tray

Select [

Printer Features

] from the

panel menu.

Select [

Insert Options

] from [

Feature

Sets

Select [

Multipurpose tray is handled

as manual feed

] check box.

Configure other settings if necessary and
then start printing.

When a request message appears on the

operator panel for loading paper on the MP
tray, press the or to select [

Start

]

and then press .

If you print a document of multiple pages, every
time a page is printed the same message appears.

Memo

Open the Detailed Setup Menu by pressing the [

Show

Details

] button in Max OS X 10.7 or by clicking the

triangle symbol at the side of [

Printer

] menu in Max OS X

10.5 to 10.6.

Printing on Envelopes

You can print on envelopes by changing the

paper size setting, and using the MP tray

(e-STUDIO332S: Manual Feeder) and the face up

stacker.
Set the paper size of MP tray on the operator

panel, and then make print settings including

paper size and paper tray with the printer driver.

Note

Warp or creasing may appear after printing. Make sure
that there is no problem by test printing.

Envelopes should be loaded with the address side up.
- You envelopes (Monarch, Com-9, Com-10, DL, C5, C6)

should be loaded so that the flap is on the right side to
the feeding direction.

Memo

Do not select duplex printing on envelopes.

Reference

For available envelopes refer to the User's Manual Basic.

Manual printing is also available for printing on envelopes.
For details on manual printing, refer to

"Manual Printing" P. 49

Load paper on the MP tray and then

press the set button.

Open the face up stacker at the rear of

the machine.

Press the <

SETTING

> key on the

operator panel.

Press the to select [

Paper Setup

] and

then press .

Summary of Contents for e-Studio 332s

















































































































































































Search results

Summary of Contents for e-Studio 332s

Reviews:

Related manuals for e-Studio 332s

Brands by name

Popular brands

Toshiba e-Studio 332s, User Manual Advanced

Search results

Summary of Contents for e-Studio 332s

Reviews:

Related manuals for e-Studio 332s

Brands by name

Popular brands