Toshiba e-Studio 332s User Manual Advanced Download Page 104

Page: 104 / 177

Utilities common to Windows/Mac OS X

- 104 -

Utilities common to Windows/Mac OS X

This section explains webpages that can be used by both Windows and Mac OS X.
When using webpages, the following conditions must be met.

TCP/IP must be enabled.

One of the following must be installed: Microsoft Internet Explorer 6.0 or later, Safari 3.0 or later, or Firefox 3.0 or
later.

Memo

Either set your webpage security settings to a medium level, or enable cookies.

[In order to access the [

Admin Setup

] menu, the administrator password is required. The default password is "aaaaaa".

Webpage

You can carry out the following operations from

the webpage.

Display the machine status.

Create profiles.

Configure tray, network, function default, and
machine settings.

Display the job list.

Print out a PDF without a printer driver.

Configure the auto delivery (e-STUDIO403S only)
and transmission data save functions.

If an SD card is not inserted, the Auto Delivery
function will not operate.

Link to frequently used webpages.

Memo

In order to change the machine settings on the webpage,
you need to be logged in as the administrator.

Reference

For details on how to configure the network settings, refer
to

"Changing Network Settings From the Web Page" P. 148

Access the machine webpage.

Launch your web browser.

Type in "http:// (machine's IP address)"

in the address bar and press the

Enter

> key.

Reference

For the machine

s IP address, please refer to the

User's Manual Basic.

Log in as the administrator.

Note

You must be authorized as the administrator.

Memo

The default administrator password of the machine is
"aaaaaa".

Click on [

Administrator Login

] on the

main page.

Enter "root" in [

Username

] and enter

the administrator password in

[

Password

], and then click [

For Mac OS X, type in "root" for [

Name

] and enter

the machine administrator's password in
[

Password

], and then click [

Login

Summary of Contents for e-Studio 332s

















































































































































































Search results

Summary of Contents for e-Studio 332s

Reviews:

Related manuals for e-Studio 332s

Brands by name

Popular brands

Toshiba e-Studio 332s, User Manual Advanced

Search results

Summary of Contents for e-Studio 332s

Reviews:

Related manuals for e-Studio 332s

Brands by name

Popular brands